News
NFC Scavenger Hunt: Benefits Over QR Codes and Tag Setup Tips for Organizers
QR codes are the default way to check in at a digital scavenger hunt. At busy events, though, organizers often run into two complaints: a crowd forms in front of each QR code, and some participants report that the stamps they collected have disappeared.
This guide explains the benefits of running a scavenger hunt with NFC tags, how NFC differs from QR codes, and, based on the Petanco help docs, how to choose and install tags so they read reliably.
What you will learn
- How an NFC scavenger hunt works
- Two problems that are common with QR codes: crowding, and stamps that seem to disappear
- Why NFC reduces both waiting time and check-in mistakes
- Why NFC is harder to cheat than a QR code, and where its limits are
- The drawbacks of NFC and how to cover them, including posting a QR code alongside the tag
- Practical tips for choosing and installing NFC tags
The short answer: NFC is a single tap, and it always opens the same browser
With NFC, a check-in starts the moment a participant holds their phone to the tag. There is no camera to open and nothing to frame, so each check-in takes less time and lines are less likely to build up.
The second benefit is that tapping a tag opens the page in the phone’s regular browser. A QR code can open in different browsers depending on which app scanned it, and that is the main cause of “my stamps are gone” reports. NFC makes that mismatch much less likely.
How an NFC scavenger hunt works
An NFC tag is a small chip that a smartphone can read when held close to it. In Petanco, each spot has its own URL. You write that URL to a tag and install the tag at the venue.
- The participant holds their smartphone to the NFC tag
- The phone reads the URL and opens the spot page in the browser
- The participant goes straight to check-in and collects the stamp
No app is required. Both iPhone and Android can read NTAG-type tags without one. Like a QR code, the tag simply opens a URL, so you can combine NFC with a keyword, quiz, or puzzle, or with GPS location checks.
Two common problems with QR code scavenger hunts
Problem 1: Crowds form in front of the spot
To scan a QR code, a participant has to open the camera, fit the whole code in the frame, and avoid glare or poor lighting. It takes experienced users a moment, but others stop right in front of the sign. A QR code is hard to scan from an angle, so only a few people can stand in front of it at a time, and a line forms during peak hours.
Problem 2: The page opens in an in-app browser, and stamps seem to disappear
In a scavenger hunt that uses the “No Login” method, a participant’s data is tied to the browser they first opened it in. The stamps themselves are stored on the server, but opening the scavenger hunt in a different browser starts a new participant, so the stamps collected so far are not shown.
Which browser a QR code opens in depends on how it was scanned. Each of the following opens the page somewhere other than the participant’s usual browser:
- Scanning with “Code Scanner” in the iPhone Control Center
- Scanning with a QR code reader app
- Opening the link inside a social media or messaging app
If a participant opens the first spot in Safari and the second with Code Scanner, the second stamp is recorded under a different participant. From their point of view the stamps have disappeared or stopped adding up, and your staff get the question on the day.
Four benefits of using NFC
Benefit 1: Participants check in right away with a tap
NFC is the fastest check-in method in Petanco. There is no camera to launch and nothing to focus. Holding the phone near the tag opens the page, which shortens each check-in and keeps the area in front of the spot clear.
You can also attach several tags written with the same URL to spread people out. Reading any of them counts as a check-in at the same spot.
Benefit 2: The tag opens in the browser, so there are fewer mistakes
When a participant taps an NFC tag, the phone’s operating system opens the URL in its regular browser (Safari on iPhone, typically Chrome on Android). Unlike a QR code, there is no choice of which app to scan with.
As a result, every spot opens in the same browser and every stamp is added to the same participant’s data. The “my stamps disappeared halfway through” problem that comes with QR codes becomes much less common.
Benefit 3: Tags are durable and keep your signage clean
A QR code can become unreadable when it is torn, dirty, or reflecting light. NFC tags are durable and still read when the surface is dirty. A tag takes up only a small part of a poster or sign, so it does not get in the way of the design.
Benefit 4: A tag cannot be photographed and shared, so cheating is harder
A QR code can be photographed and shared on social media or in a chat. Anyone who receives the image can scan it and check in without visiting the spot.
An NFC tag has no code to photograph. To read the URL, a participant has to be on site and hold their phone to the tag. That makes check-ins by people who never came much less likely than with a QR code. Locking the tag after writing also prevents a third party from rewriting it with a different URL.
NFC does not rule cheating out completely, because a participant can still send the URL they opened to someone else. When you need to confirm that participants are on site, for example at an event with prizes, use the “NFC Tag + GPS” mode to add a location check.
QR codes vs. NFC tags
| QR code | NFC tag | |
|---|---|---|
| How participants check in | Open the camera, frame the code, and scan | Hold the phone to the tag |
| Which browser opens | Depends on the app used to scan (may be an in-app browser) | The phone’s regular browser |
| Handling crowds | Must be scanned from the front, so lines form easily | Quick, and you can attach several tags to spread people out |
| What you prepare | Printed QR codes | NFC tags (you buy them and write the URLs) |
| Supported devices | Almost every smartphone | Smartphones that support NFC and have it turned on |
| Resistance to cheating | The code can be photographed and shared. Combine with GPS to confirm participants are on site | Cannot be shared by photo. Combine with GPS to stop an opened URL from being passed on |
Drawbacks of NFC and how to cover them
- You need to buy and write tags: A QR code only has to be printed. With NFC, you prepare tags and write each spot’s URL to them.
- Some phones cannot read them: Tags cannot be read on smartphones that do not support NFC or have NFC turned off.
You can cover the second drawback by posting a QR code alongside the tag. In Petanco, turn on “Also allow QR codes” under “Stamp Settings” on the spot settings page (“Check-in Settings” for Point Challenges and Collection Cards). You can then download a QR code that opens the same URL as the tag. Reading either one counts as a check-in at the same spot, and no one receives a duplicate stamp. Keep in mind that a QR code can be photographed and shared, so a spot with a QR code posted is only as cheat-resistant as a QR code spot.
Ask participants who use the QR code to scan it with the “Scan QR Code” button on the participant screen, so they stay in the same browser. A short note on your sign is enough.
How to choose and install NFC tags
How reliably a tag reads depends on the tag itself and on how it is installed. These are the points covered in the Petanco help docs, in the order you will prepare them.
Tip 1: Use NTAG213, NTAG215, or NTAG216
Use NTAG213, NTAG215, or NTAG216 tags (NFC Forum Type 2). Both iPhone and Android can read these without an app. The URL you write is about 110 bytes, which fits even on the NTAG213, the smallest of the three (144 bytes). Do not use MIFARE Classic tags, because iPhones cannot read them.
Tip 2: Choose tags at least 30 mm across, or card-type tags if in doubt

Small tags around 20 mm (0.8 in) only respond when lined up precisely with the phone’s antenna. Use tags at least 30 mm (1.2 in) in diameter. Card-type tags the size of a business card (85 x 54 mm) are the most reliable, because participants do not have to aim.
Tip 3: Use on-metal tags on metal surfaces
Tags barely respond when attached to metal. For signs, pillars, and other metal surfaces, use on-metal tags.
Tip 4: Keep covers to a few millimeters
If you cover a tag with an acrylic plate or similar, keep the cover no more than a few millimeters thick. A tag behind a thick cover may not read.
Tip 5: Tell participants where to hold their phone
On an iPhone the antenna is at the top edge (the camera end). On most Android phones it is near the center of the back, though this varies by model. Adding a note such as “Hold the top of your phone to the tag” reduces failed reads.
On iPhone XS and later, holding the phone to the tag while the screen is on shows a notification, and tapping it opens the page. On Android, NFC must be turned on in settings and the screen must be unlocked.
Tip 6: Attach several tags at busy spots
Where many participants gather, attach several tags written with the same URL, spaced a little apart. Any of them checks the participant in at the same spot, so the line spreads out.
Tip 7: Lock the tag after writing
Write a single URL record to each tag, then lock it. An unlocked tag could be overwritten with a different URL by a third party. Locking cannot be undone, so check the URL first.
Tip 8: Install tags where they are hard to peel off, and check them during the event
Locking only prevents a tag from being rewritten. It does not stop someone from sticking another tag over it, so install tags where they are hard to remove and check them regularly during the event.
Tip 9: Test with both an iPhone and an Android phone before the event
Surfaces and covers affect how well a tag reads. Test each tag where it will actually be installed, not on a desk, with both an iPhone and an Android phone.
Tip 10: Add “Open in Safari or Chrome” to your announcements
Tapping an NFC tag opens the page in Safari or Chrome. Tapping a link in a social media post or a chat message opens the page inside that app instead. The two count as different browsers, so someone who joins from social media starts again with zero stamps the first time they tap a tag. Next to the link or QR code you share for joining, add a note such as “Open in Safari or Chrome.”
How to set up an NFC scavenger hunt in Petanco
- Step 1: Create a campaign and add your spots
- Step 2: Choose “NFC Tag” as the trigger in the check-in mode (you can also set it per spot)
- Step 3: Copy the NFC URL for each spot. “Download All” on the spot list gives you every spot’s URL in a single CSV file
- Step 4: Write each URL to a tag with an NFC writing app, then lock the tag
- Step 5: Install the tags and test them with both an iPhone and an Android phone
Changing the check-in mode during the event does not change the tag URLs. You can turn on QR codes alongside the tags on the day without replacing a single tag.
Frequently Asked Questions
Do participants need an app to read NFC tags?
No. Both iPhone and Android can read NTAG213, NTAG215, and NTAG216 tags without an app. Tapping the tag opens the spot page in the browser.
What about participants whose phones cannot use NFC?
Turn on “Also allow QR codes” and post the QR code next to the tag. The QR code and the tag open the same URL, so reading either one counts as a check-in at the same spot.
Can I attach more than one NFC tag to a single spot?
Yes. As long as the tags are written with the same URL, reading any of them counts as a check-in at the same spot. This is a good way to spread out a crowd.
Can I reuse locked NFC tags at my next event?
Yes, if you keep using the same spot. Spots created by duplicating a spot, by CSV import, or by duplicating a campaign get a new URL, so they need new tags.
Does NFC stop people from checking in without visiting the spot?
It makes it less likely than with a QR code, but not impossible. A tag cannot be photographed and shared, yet the URL a participant opened can still be passed on. To confirm that participants are on site, use the “NFC Tag + GPS” mode to add a location check. Note that GPS can be less accurate indoors.
Will NFC put an end to “my stamps disappeared” reports?
It reduces the mismatches caused by in-app browsers. A participant who clears their browser data or opens the scavenger hunt on another device still starts as a new participant, even with NFC. For longer events, consider “Easy Login” or the backup option.
Summary
- NFC check-ins start with a tap, so each one takes less time and lines stay short.
- Tapping a tag opens the phone’s regular browser, which reduces the “stamps disappeared” problem caused by in-app browsers.
- An NFC tag cannot be photographed and shared, so it is harder to cheat than a QR code. Combine it with GPS when you need to be sure.
- For phones that cannot use NFC, post a QR code with the same URL alongside the tag.
- Use NTAG213, 215, or 216 tags at least 30 mm across (card-type if in doubt), and on-metal tags on metal surfaces.
- Lock each tag after writing, and test it where it will be installed with both an iPhone and an Android phone.
Creating and testing a campaign in Petanco is free. Start with a single NFC tag and see how quickly a tap turns into a stamp.
→ Create your NFC scavenger hunt with Petanco for free
- See all Petanco features, including check-in methods
- Pricing
- How a digital scavenger hunt works
- GPS map vs. custom floor map for organizers
Author: Petanco Staff